Product ID:MS-2000; HARDENER COMPONENT
MSDS Date:10/05/1992
FSC:8040
NIIN:00N039266
Kit Part:Y
MSDS Number: BRKZC

AMERICAN SAFETY TECHNOLOGIES INC

565 EAGLE ROCK AVE
ROSELAND, NJ 07068
US

Emergency Phone: 201-403-2600;800-424-9300(CHEMTREC)

Info Phone: 201-403-2600

Cage: AMSAT

AMERICAN SAFETY TECHNOLOGIES INC.

ROSELAND, NJ 07068 US

Telephone: 800-424-9300

Cage: AMSAT

1,2-ETHANEDIAMINE,

CAS: 112-57-2

RTECS: KH8585000

Fraction By Weight: 4%

OSHA PEL N/K

ACGIH TLV: N/K

POLYAMIDE RESIN

CAS: 68410-23-1

OSHA PEL N/K

ACGIH TLV: N/K

BUTYL ALCOHOL; (N-BUTYL ALCOHOL)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 20 + 6%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CAUSES SEVERE
IRRIT/BURNS. MAY CAUSE PERMANENT VISUAL IMPAIRMENT. SKIN: CAUSES
SEVERE IRRIT/BURNS. MAY BE ABSORBED THRU SKIN IN HARMFUL AMOUNTS.
INHAL: MAY CAUSE UPPER RESPIRATORY TRACT I RRITATION. INGEST: MAY
CAUSE BURNS OF MOUTH & THROAT. CONTAINS MATERIAL THAT MAY BE
SLIGHTLY TOXIC. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OVEREXPOSURE EFTS: IRRITATION,
SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND OTHER SKIN
CONDITIONS.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH CONTACT AREA WITH MILD SOAP AND WATER. INHAL: REMOVE TO FRESH
AIR. IF S YMPTOMS PERSIST CONSULT A PHYSICIAN. INGEST: DO NOT
INDUCE VOMITING. IF CONSCIOUS, GIVE LARGE QY OF WATER TO DILUTE.
GET MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:>100F,>38C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, CHEMICAL FOAM/WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . ELIMINATE ALL IGNITION SOURCES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. DECOMP &
COMBUSTION PRODUCTS MAY BE TOXIC.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. DIKE SPILL.
ABSORB W/INERT MATERIAL AND COLLECT FOR DISPOSAL. FLUSH
CONTAMINATED AREA WITH WATER; PREVENT WASHINGS FROM ENTERING
WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID ALL PERSONAL CONTACT. DO NOT
EXCEED 110F/43C IN STORAGE AREA. GROUND AND BOND METAL CONTAINERS
FOR LIQUID TRANSFER TO AVOID STATIC SPARKS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE IF REQUIRED.
Ventilation:EXPLO-PROOF MECH VENT & LOC EXHAUST RECOM. MECH EXHAUST IS
NOT RECOM AS SOLE MEANS OF CONTROLLING EMPLOYEE EXPOSURE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IN OPERATIONS WHERE CONT MAY OCCUR
COVERALLS, APRON & IMPERVIOUS FOOT COVERING ARE RECOM. SFTY SHOWER
& EYE (SUPP DATA)
Work Hygienic Practices:IMMEDIATELY REMOVE AND THOROUGHLY LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
OTHER PROT EQUIP: WASH FACILITY SHOULD BE AVAILABLE TO EMPLOYEES.

Spec Gravity:0.96
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:AMBER LIQUID, SOLVENT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OXIDES OF NITROGEN.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.